Сортировать по:
7 продуктов
7 продуктов
Кожаный анилиновый краситель Pro
Профессиональный краситель на водной основе для глубокого проникновения и обновления цвета натуральной анилиновой кожи. Предназначен как для реставрации, так и для производства . Он восстанавливает выцветшие покрытия, усиливает глубину цвета и сохраняет естественную мягкость и текстуру кожи.
Что это делает
Leather Aniline Dye Pro — это система окрашивания нового поколения, разработанная для омоложения и восстановления натуральной кожи. В отличие от поверхностных пигментов, она проникает глубоко в структуру волокон, обогащая кожу изнутри и подчеркивая её естественный характер, не скрывая при этом её уникальный рисунок.
Эта формула профессионального уровня идеально подходит для восстановления цвета, корректировки тона, финишной обработки в процессе производства и персонализации . Aniline Dye Pro обеспечит насыщенный, ровный цвет, сохраняя при этом мягкость и роскошь материала, будь то восстановление выцветшей кожаной обивки или финишная обработка высококачественных шкур в процессе производства.
Профессиональные приложения
- Реставрация: восстановление выцветших кожаных интерьеров, мебели и аксессуаров, сохранение их естественного внешнего вида и текстуры.
- Производство: достижение однородного тона и глубины цвета в процессе производства кожи без изменения текстуры.
- Индивидуализация: создание индивидуальных оттенков или углубление существующих цветов для получения уникальной, эксклюзивной отделки.
- Ремонт и повторная отделка: Плавно совместите отремонтированные участки с окружающей поверхностью.
Можно наносить вручную (губкой или тканью) или с помощью распылительных систем (аэрографа или краскопульта) для получения равномерного покрытия профессионального уровня.
Совместимые типы кожи
Краска Leather Aniline Dye Pro предназначена для использования на:
- Анилиновая кожа
- Полуанилиновая кожа
- Кожа для подтягивания
- Кожа растительного дубления
- Пигментированная кожа (для перекрашивания базового тона)
- Кожа с корректированным зерном
Не рекомендуется для замши и нубука. См. решения для замши и нубука в линейке LeTech.
Технические характеристики
| Параметр | Ценить |
|---|---|
| Тип | Анилиновый краситель глубокого проникновения на водной основе |
| Совместимые виды кожи | Анилин, полуанилин, подтягивание, растительное дубление, пигментированный, с исправленным зерном |
| Приложения | Реставрация, изготовление, кастомизация, подбор цвета, повторная отделка |
| Методы применения | Вручную (губкой/тряпкой) или распылением (аэрографом/краскопультом) |
| Заканчивать | Натуральная, прозрачная отделка, сохраняющая текстуру и ощущение |
| Доступные тома | 100 мл / 200 мл |
Советы и сопутствующие товары
- Сочетайте с верхним покрытием для кожи для повышения долговечности поверхности и устойчивости к ультрафиолетовому излучению.
- Добавьте добавку X-Guard к вашему покрытию для максимальной устойчивости к истиранию и стабильности цвета.
- Нанесите герметик и защитите окрашенную поверхность с помощью крема для защиты кожи, чтобы она прослужила долгое время.
Почему LeTech
LeTech — британский бренд, которому доверяют профессионалы в автомобильной, мебельной, модной и авиационной промышленности. Наш анилиновый краситель для кожи Leather Aniline Dye Pro разработан для глубокого, равномерного проникновения и естественного покрытия, оставаясь при этом полностью совместимым с современными системами отделки на водной основе и защитными технологиями LeTech.
Объедините его с другими решениями LeTech для получения комплексной системы реставрации и отделки кожи профессионального уровня.
Leather Balm — Leather Care Wax by LeTech
Leather Balm is a leather care balm available in five different fragrance options, each with its own unique character. It is designed for regular care of natural leather, especially vegetable-tanned and aniline-type leathers, adding a very light darkening effect while enriching the color and protecting the surface.
The balm provides conditioning and protective properties and gives leather a pleasant tactile feel. With regular use, Leather Balm helps preserve the original beauty and softness of natural leather for a long time, protects it from water and ultraviolet exposure and significantly extends the service life of your leather goods. Leather Balm is also suitable for final-stage protection during the manufacturing of leather items, helping to reliably preserve the product and give it a pleasant scent.
Fragrance Options
Leather Balm is available in five fragrance variations, each with its own unique properties:
-
Rose Scent
A gentle, refined rose fragrance created by adding natural rose oil to the balm.
-
Tar Scent
The addition of high-quality tar gives the balm a pleasant, slightly sweet, oily aroma with notes of smoke and wood. The tar version also enhances preservative properties and helps prevent mold and bacterial growth on leather.
-
Leather Scent
The scent of premium natural leather makes interaction with your leather item even more enjoyable and emphasizes its uniqueness.
-
Citronella Scent
A fresh aroma with lemon notes that not only pleases with its fragrance, but also effectively repels mosquitoes and insects. An ideal choice for caring for leather saddles and tack.
-
Neutral Scent
A classic balm without added fragrance — only natural oils and waxes to nourish and protect your leather goods.
Signature Advantages
-
Designed for regular care of natural leather
-
Ideal for vegetable-tanned and aniline-type leathers
-
Provides a very light darkening effect that enriches the color
-
Conditions, nourishes and protects the leather
-
Improves tactile feel and surface comfort
-
Helps protect leather from water and UV exposure
-
Contributes to longer service life of leather items
-
Suitable for use at the final stage of production as a protective and finishing balm
Created for Leather Goods
Leather Balm is ideal for:
-
Bags and leather accessories
-
Hunting gear and equipment
-
Footwear
-
Belts
-
Saddles and tack
Not suitable for suede or nubuck.
Compatible Leather Types
Suitable for:
-
Vegetable-tanned leather
-
Aniline-type leather
-
Other natural leathers requiring nourishment, light darkening and protection
Not suitable for:
-
Suede
-
Nubuck
Refined Result
With regular use, Leather Balm provides:
-
Slightly deepened, richer color
-
Softer, more supple leather
-
Enhanced resistance to moisture and UV exposure
-
A pleasant, natural feel in hand
-
A refined, light fragrance of your choice or a neutral finish with no added scent
Application Notes
-
Use Leather Balm as part of regular care for natural leather.
-
Before full application, test the balm on a small, inconspicuous area to ensure there are no undesirable reactions and that the effect matches your expectations.
-
Always follow the manufacturer’s instructions on the packaging.
-
Not recommended for use on suede or nubuck.
For additional consultation on LeTech leather care products, our specialists are always available to assist.
Leather Burnishing Gum — LeTech
Leather Burnishing Gum is a colourless, water-based wax designed for the professional finishing of natural leather edges. Its balanced consistency makes it easy to apply, spread and then buff to a smooth, polished finish. Once worked in and burnished, the product delivers a refined edge with a subtle gloss and water-repellent properties.
Leather Burnishing Gum combines natural waxes and water-based polymers. The components are selected to optimize burnishing performance, allowing the edge to be compacted, smoothed and polished for a clean, professional look and reliable protection. The wax creates a smooth, glossy and well-finished edge that enhances the overall appearance of hand-crafted leather goods.
The product can be used on both vegetable-tanned and chrome-tanned leathers. It is also suitable for treating the flesh side (back side) of natural leather where a more controlled, refined surface is required.
Leather Burnishing Gum emphasizes the uniqueness of your leather projects and helps them stand out with a clean, finished edge and additional protection against external influences.
⭐ Signature Advantages
-
Colourless, water-based wax for leather edge finishing
-
Optimal consistency for easy application, spreading and polishing
-
Polishes well and provides a water-repellent effect
-
High aesthetic appeal with a professional, finished look
-
Resistance to water and harsh environmental conditions
-
Noble, attractive gloss on the edge
-
Resistance to mechanical friction while maintaining elasticity
-
Suitable for both vegetable-tanned and chrome-tanned leathers
-
Can be used on the edge and on the flesh side of natural leather
👨🏭 Created for Professionals
Ideal for:
-
Leather belts
-
Watch straps
-
Vegetable-tanned leather goods
-
Hand-crafted leather items and leathercraft projects
For additional consultation on LeTech leather products, our specialists and managers are always available to assist.
🧬 Compatible Leather Types
Suitable for:
-
Vegetable-tanned leather
-
Chrome-tanned leather
-
Natural leather edges and flesh side where burnishing is required
Not explicitly intended for:
-
Suede and nubuck (edge-specific product; main use is for cut edges and flesh side of smooth leathers)
🎯 Refined Result
With proper use, Leather Burnishing Gum delivers:
-
Smooth, compacted and polished edges
-
A clean, glossy and professional appearance
-
Improved resistance of the edge to moisture and external exposure
-
Enhanced durability against mechanical friction
-
A more finished, premium look that visually upgrades the entire leather item
📘 Application Notes
-
Use Leather Burnishing Gum on prepared leather edges for final finishing.
-
Apply a thin layer to the edge or flesh side where burnishing is needed.
-
Work the product into the edge using your preferred burnishing tool until the surface becomes smooth and glossy.
-
Allow the treated area to dry so the water-based wax and polymers can set and form a protective layer.
-
Always test the product on a small, inconspicuous area before full application to check for undesired reactions and to verify the result.
-
Follow the manufacturer’s instructions for safe and effective use.
Leather Resist & Seal — Craft Line
Leather Resist & Seal from the Craft Line is a protective finish developed specifically to create a stronger, clearer antique effect on leather while protecting the surface. This product works perfectly in combination with Leather Antique Gel, acting both as a resist and as a protective sealer. Leather Resist & Seal also helps shield leather from moisture, dirt and fading.
The product is designed to prevent Leather Antique Gel from fully penetrating areas where the resist has been applied. As a result, the antique gel settles more deeply into tooling and embossing, creating high contrast, emphasizing the pattern and making the leather item more visually expressive.
Leather Resist & Seal forms a highly elastic, durable and resistant film. Once dried and cured, it improves resistance to abrasion, scratching, moisture and solvent exposure, helping to maintain the appearance and performance of your leather projects.
Signature Advantages
-
Developed specifically for creating antique-style leather finishes
-
Excellent resistance and durability in use
-
Protects leather from moisture, dirt, fading and sun exposure
-
Simple and convenient to work with in craft workflows
-
Acts as a resist for Leather Antique Gel, enhancing contrast in tooling and embossing
-
Forms a flexible, strong and stable film resistant to external influences
Created for Professionals
Leather Resist & Seal is ideal for:
-
Leather belts
-
Watch straps
-
Vegetable-tanned leather projects
-
Handcrafted leather goods and tooling work
Not suitable for suede or nubuck (see Leather Types).
Compatible Leather Types
Suitable for:
-
Vegetable-tanned leather
-
Natural leather for tooling, carving and antique finishing
-
Handcrafted leather items requiring contrast and protection
Not suitable for:
-
Suede
-
Nubuck
Refined Result
-
Strong, well-defined antique contrast in carved and embossed areas
-
Protected leather surface with enhanced resistance to wear, scratches and moisture
-
More expressive, visually rich leather projects with stable, long-lasting finish
Application Notes
-
Use Leather Resist & Seal as part of your antique leather finishing workflow, especially in combination with Leather Antique Gel.
-
Apply to clean, dry leather according to your chosen application method and allow to dry fully before using Leather Antique Gel.
-
The product helps control where the antique gel penetrates and where it is resisted, increasing contrast in tooling and embossed areas.
-
Always test on a small, inconspicuous area first to make sure the result meets your expectations and to check leather sensitivity.
-
Follow all manufacturer instructions and safety recommendations during use.
For additional consultation on LeTech CRAFT LINE products, our specialists are always available to assist.
Leather Oil Dye Reducer — Craft Line
A specialized reducer formulated to dilute Leather Oil Dye, adjust color saturation and achieve precise tones during the dyeing of natural leather. The reducer can also be used as a standalone product to create a subtle pull-up effect, making it an essential tool for leathercraft and manual dyeing workflows.
Signature Advantages
• Formulated for thinning oil-based leather dyes
• Reduces color intensity for accurate shade adjustment
• Can be used independently to create a light pull-up effect
• Supports custom tones and creative finishing techniques
• Ideal for hand-crafted projects and vegetable-tanned leather
• Works seamlessly with the LeTech Craft Line dyeing system
Created for Professionals
• Leather artisans and crafters
• Small-batch leather goods manufacturers
• Workshops working with veg-tan and natural leather
• Makers of belts, watch straps and hand-crafted accessories
Compatible Materials
Suitable for:
• Vegetable-tanned leather
• Natural leather for hand dyeing
• Belts, straps, craft leather projects
Not suitable for:
• Suede
• Nubuck
Refined Result
A clean, controlled dyeing process with adjustable saturation and the ability to create subtle, natural pull-up visual effects.
Application Notes (временно — базовый блок, финальный будет после твоего текста)
• Shake well before use
• Mix reducer with Leather Oil Dye to achieve desired dilution
• Test on a hidden area before full application
• Follow LeTech Craft Line dyeing instructions for best results
LEATHER CASEIN ADDITIVE — LETECH EXPERT LINE
Polyurethane-modified casein additive designed to improve elasticity, adhesion and durability in leather finishing systems. Ideal for footwear, apparel and leather goods.
Signature Advantages
• Enhanced elasticity and flexibility — maintains natural leather movement without cracking
• Improved adhesion — strengthens bonding within finishing systems for longer-lasting results
• High wear and abrasion resistance — supports heavy-use leather applications
• Moisture- and chemical-resistant film that outperforms traditional casein coatings
• Breathable dispersion layer that supports vapor exchange and prevents over-sealing
• Stable, uniform film formation for cleaner visual blending and improved surface quality
Created for Professionals
• Footwear finishing and leather apparel production
• Leather goods manufacturing and accessory finishing
• Restoration studios working with premium leather surfaces
• Workshops requiring durable, breathable finishing solutions at scale
Compatible Leather Types
Suitable for finished and pigmented leather, as well as coated PU/artificial leather surfaces.
Not suitable for suede or nubuck. Always perform a patch test on an inconspicuous area.
Refined Result
A resilient, well-formed, breathable finishing film that adds strength, adhesion and resistance to coatings while preserving the natural aesthetic and tactile properties of the leather.
Application Notes
Use as an additive in finishing or top-coat systems.
Mix thoroughly before application. Apply using standard spray or finishing equipment according to your coating workflow.
Allow proper curing time for best performance.
Always follow manufacturer instructions and test product suitability prior to full-scale use.
Кожа MATT X2 HyperMatt + SoftTouch
Суперматовое защитное покрытие на водной основе, разработанное для создания **ультраматичного** внешнего вида и изысканного ощущения **SoftTouch**. Обеспечивает исключительную устойчивость к истиранию, царапинам, воздействию влаги и распространённых растворителей, сохраняя при этом натуральную тактильную чувствительность кожи.
Что это делает
Leather MATT X2 создаёт плотную, прочную плёнку, которая обеспечивает стабильный матовый оттенок («анти-блеск») и защищает кожу от повседневного износа. Разработанная в соответствии с отраслевыми стандартами, а зачастую и превосходящими их, она помогает салону сохранять свежий, не блестящий вид в условиях реальной эксплуатации.
Разработано для профессиональных отделочных и реставрационных работ, где критически важны **равномерная глубокая матовость** и **приятная сухость на ощупь**.
Профессиональные приложения
- Автомобильные интерьеры: рулевые колеса, валики, панели сидений и отделка салона высокого качества.
- Мебель и коммерческие помещения: места для сидения в помещениях с высокой посещаемостью, в гостиничных и офисных помещениях.
- Изделия из кожи: сумки, кошельки, чехлы, требующие минимального блеска и легкости в чистке.
Совместимые типы кожи
Для обработанной/пигментированной кожи и многих поверхностей из полиуретана/искусственной кожи в полиуретановых системах на водной основе. Всегда сначала проверяйте средство на незаметном участке.
Не рекомендуется для замши и нубука.
Технические характеристики
| Параметр | Ценить |
|---|---|
| Заканчивать | Гиперматовый (ультратонкий глянец) с тактильным эффектом SoftTouch |
| Сопротивление | Высокая стойкость к истиранию и царапинам; устойчивость к влаге и растворителям |
| Приложение | Распыляйте или наносите губкой тонкими, равномерными слоями; делайте паузу между слоями. |
| Использование системы | Финальный защитный слой поверх систем LeTech Colourant |
| Добавки (для профессионального использования) | Работает с сшивающим агентом (долговечность) и скользящей добавкой (приятно на ощупь) — уточните соотношения |
| Доступные тома | 100 мл / 3,38 жидких унций; 145 мл / 4,90 жидких унций; 200 мл / 6,76 жидких унций; 500 мл / 16,91 жидких унций — наличие может меняться; требуется подтверждение |
| Очистка | Система на водной основе; немедленно промойте инструменты водой |
Советы и сопутствующие товары
- Тщательно подготовьте поверхность (очистите/удалите глянец), чтобы обеспечить равномерную матовость и адгезию.
- Наносите несколько тонких слоев вместо одного толстого, чтобы избежать нарастания текстуры.
- Для рулевых колес и зон повышенного износа сочетайте с Cross-Linker и Slip Additive в соответствии с профессиональными рекомендациями для максимальной износостойкости и превосходного ощущения.
Точные настройки распыления, температуры и соотношения добавок — требуют проверки в TDS/SDS .
