LETECH — LEATHER PRIMER

Professional water-based adhesion promoter for leather and PU. Levels porosity, improves wetting and creates a stable, receptive foundation for durable recolouring and protective top coats.

⸻

Signature Advantages

• High-adhesion intercoat for stronger colour bonding

• Flexible, non-brittle film

• Evens absorption on repaired and intact areas

• Supports long-term durability in high-wear zones

⸻

Created for Professionals

• Automotive: bolsters, steering wheels, panels after prep/filler

• Furniture: seating areas and armrests for uniform recolouring

• Leather goods: bags, footwear, accessories requiring strong adhesion

⸻

Compatible Leather Types

Finished/pigmented leather, many semi-aniline and PU/artificial leather surfaces prepared with Degreaser/Prep.

Not suitable for suede or nubuck.

⸻

Refined Result

A smooth, keyed, absorption-balanced surface that anchors Colourant evenly and boosts scratch and wear resistance.

⸻

Application Notes

Apply by sponge or spray in thin, even coats; allow light flash between layers.

Prep workflow: Degreaser → Prep → (Binder/Fillers if needed) → Leather Primer → Colourant → Top Coat.

Use multiple light passes rather than one heavy coat.

For extreme-wear zones pair colour/top coat with Cross-Linker for maximum resistance.

LETECH LEATHER BINDER

A professional water-based fibre-reinforcing binder that penetrates deep into fatigued leather, consolidating weakened fibres and restoring structural integrity. The perfect preparation layer before fillers, primers and colour restoration.

⸻

Signature Advantages

• Re-strengthens worn, thinned or frayed leather fibres

• Creates a stable base for Light/Heavy Filler and colour systems

• Water-based, low-odour formulation

• Fast drying with warm-air assist (40–60 °C)

• Brush or sponge application — thin, controlled layers

⸻

Created for Professionals

• Pre-repair consolidation: stabilise fatigued areas before applying fillers

• Minor wear treatment: reduce fibre fuzz and restore edge integrity

• System foundation: prepare a uniform, reinforced surface for primer, colourant and top coat

Designed for automotive interiors, furniture, leather goods and contract restoration workflows.

⸻

Compatible Leather Types

Suitable for:

• Smooth finished / pigmented leather

• Coated PU / artificial leather

(Not for suede or nubuck — use dedicated nubuck/suede solutions.)

Always perform a test on a small hidden area before full application.

⸻

Refined Result

A strengthened, consolidated fibre structure that resists further tearing and provides an ideal base for filler levelling, recolouring and protective finishing.

⸻

Technical Specifications

Type: Water-based polymer binder

Application: Sponge or brush, thin coats; avoid foaming

Drying: Warm-air assist ≈ 40–60 °C between layers

Layering: Multiple thin layers as needed; fully dry each one

Use cases: Fibre consolidation, pre-filler reinforcement, minor wear repair

Compatibility: LeTech Light/Heavy Filler, Primer, Leather Colourant, Leather Top Coat

Volumes: 200 ml / 6.76 fl oz · 500 ml / 16.91 fl oz

⸻

How to Use (Overview)

• Clean and degrease thoroughly to maximise penetration

• Feather damaged edges; apply Binder before any filler

• Apply thin, even layers with a brush or sponge

• Dry each layer with warm air (40–60 °C)

• Once fully stabilised, proceed with Light/Heavy Filler → Primer → Colour → Top Coat

⸻

Tips & Related Products

• Degrease with Leather Ultimate Cleaner + Alcohol Cleaner before applying Binder

• For structural losses, follow with Heavy Filler; for finishing, use Light Filler

• Seal your restoration with Leather Top Coat (optionally enhanced with X-Guard Additive)

LETECH LEATHER FLUOR COLOURANT

A high-performance fluorescent leather colour system designed for vivid, saturated, neon-level recolouring with excellent flexibility and wear resistance. Ideal for impactful accents, creative projects and professional restoration requiring a true fluorescent effect.

⸻

Signature Advantages

• Intense fluorescent visual effect

• Deep, saturated colour with fast coverage

• Flexible, elastic film that resists cracking and wear

• Professional adhesion to leather & PU surfaces

⸻

Created for Professionals

• Automotive: accent stitching channels, decorative panels, bold trims

• Footwear & leather goods: sneakers, bags, wallets, branding elements

• Furniture & retail: statement pieces, logo zones, high-visibility design

Engineered for standout colour impact while maintaining service-grade durability.

⸻

Compatible Leather Types

Suitable for:

• Pigmented / coated leather

• PU and artificial leather

Always test on a hidden area for absorption and adhesion.

(Not recommended for suede or nubuck.)

⸻

Technical Specifications

Effect: Fluorescent (absorbs light, re-emits as visible glow)

Properties: High elasticity, strong adhesion, wear-resistant finish

Application: Sponge, brush or spray in thin, even coats; allow flash-off

System compatibility: Waterborne LeTech finishing systems; top coat recommended

Available volumes: 100 ml / 3.38 fl oz · 200 ml / 6.76 fl oz

Clean-up: Water-based; rinse tools promptly with water

⸻

Tips & Colour Guidance

• Apply over an even base — bright undercoats intensify fluorescent output

• Build colour gradually in thin layers for clean, uniform brightness

• Seal with a compatible Leather Top Coat for optimal service durability

LETECH LEATHER GLUE WB

A professional water-based polyurethane adhesive for leather repair. It delivers a strong yet flexible bond without stiffening the material — ideal for delamination fixes, patch bonding, stabilising crack lines, and preparing the surface for filling and recolouring.

⸻

Signature Advantages

• Strong, flexible polyurethane bond that resists peeling and micro-cracking

• Low-odour, water-based system safe for professional workflows

• Wets fibres for deep adhesion without stiffening the substrate

• Integrates seamlessly into the “glue → fill → colour → top coat” restoration process

⸻

Created for Professionals

• Automotive & aviation interiors — bolsters, armrests, panels

• Furniture & upholstery — delamination, lifted finish layers, edge repairs

• Leather goods & apparel — inside patching, seam stabilisation, crack-line support

Suitable for finished/pigmented and corrected-grain leather.

(Not intended for suede or nubuck.)

⸻

Compatible Leather Types

Works on finished/pigmented leather, corrected-grain leather, and most coated surfaces.

(Always test on a hidden area.)

⸻

Refined Result

A stable, flexible bond that prepares leather for clean filling, smooth levelling, even recolouring, and durable top-coating — ensuring long-term restoration strength.

⸻

Application Notes

Apply a thin, even layer using a brush or spatula.

Allow partial tack to form, then press firmly and maintain contact until set.

After full cure, proceed with Surface Repair, Light Filler, Heavy Filler, recolour with Leather Colourant, and finish with Leather Top Coat.

LETECH LEATHER TOP COAT HIGH GLOSS

A premium water-based high-gloss protective finish for leather. It delivers brilliant shine, elevated durability, UV defence, and strong abrasion resistance while preserving the leather’s natural grain and tactile comfort.

⸻

Signature Advantages

• High-gloss finish that adds depth, clarity, and brilliance

• UV and abrasion defence for high-contact surfaces

• Water-based polymer system compatible with X-Guard Additive

• Enhances colour retention and blocks dye transfer

• Designed for professional leather finishing and restoration workflows

⸻

Created for Professionals

• Automotive interiors requiring gloss, protection, and long-term durability

• Furniture and upholstery where a premium, decorative gloss is desired

• Custom leather goods — bags, jackets, accessories, high-end design pieces

• Restoration projects that require a durable, glossy protective layer

Can be used as a standalone finish or upgraded with X-Guard Additive for enhanced performance.

⸻

Compatible Leather Types

Suitable for aniline, semi-aniline, pigmented, and corrected-grain/finished leathers.

(Not suitable for suede or nubuck.)

⸻

Refined Result

A luminous, high-gloss finish with elevated protection, improved colour stability, and a smooth, refined surface that enhances the overall appearance of leather.

⸻

Application Notes

Apply by spray or pad following standard top-coat workflows. Compatible with LeTech water-based systems.

For increased durability, mix in 10–15% X-Guard Additive before application and protect the final surface with Leather Protection Cream.

LETECH — LEATHER TOP COAT GLOSS

Professional waterborne clear finish delivering a high-gloss, wet-look sheen with strong resistance to abrasion, scratches, moisture and everyday contaminants. Locks in colour, adds depth and ensures long-term cleanability.

⸻

Signature Advantages

• Premium high-gloss finish

• Strong abrasion & scratch resistance

• Moisture & stain protection

• Flexible waterborne system

⸻

Created for Professionals

• Automotive: seat panels, trim, steering-wheel zones

• Furniture: high-touch seating, armrests, decorative leather

• Leather goods: bags, wallets and accessories needing glossy durability

⸻

Compatible Leather Types

Finished/pigmented leather and many PU/artificial surfaces.

Not suitable for suede or nubuck.

⸻

Refined Result

A clear, flexible top film that deepens colour, adds controlled wet-look shine and shields the surface from wear, dye transfer and premature gloss loss.

⸻

Application Notes

Apply by sponge or spray in thin, even coats; allow flash between layers.

Use as the final step: Degreaser → Prep → Primer → Colourant → Top Coat Gloss.

Build gloss with multiple light passes; avoid heavy, wet layers.

For extreme-wear areas, combine with Cross-Linker (per TDS) to maximise endurance and stability.

LETECH LEATHER ANILINE DYE PRO

A professional deep-penetration dye system for natural aniline leather. It renews colour, enriches tone, revives faded finishes, and maintains the natural softness, transparency, and luxurious character of the material — suitable for both restoration and production.

⸻

Signature Advantages

• Deep penetration into the fibre structure for natural, transparent recolouring

• Enhances colour depth without masking grain or altering feel

• Water-based, professional formulation ideal for restoration and manufacturing

• Smooth, even application by hand or spray for premium finishing results

⸻

Created for Professionals

• Restoration — revive faded interiors, furniture, and fashion leather

• Manufacturing — achieve consistent tone and depth in production finishing

• Customisation — create bespoke shades and deepen existing colours

• Repair & refinishing — blend restored areas seamlessly with original surfaces

Can be applied with sponge, cloth, airbrush, or spray gun for professional-grade uniformity.

⸻

Compatible Leather Types

Suitable for aniline, semi-aniline, pull-up, vegetable-tanned, pigmented (base tone), and corrected-grain leather.

(Not suitable for suede or nubuck.)

⸻

Refined Result

A rich, even colour that preserves the natural transparency and softness of the leather, maintaining grain visibility and premium tactile feel.

⸻

Application Notes

Apply by hand or spray, building colour gradually. Seal with Leather Top Coat for durability, enhance performance with X-Guard Additive, and protect the final result with Leather Protection Cream.

LETECH SUEDE & NUBUCK SOFTENER

A professional softening and re-fatting treatment for suede, nubuck, and selected aniline leathers. It restores the moisture–lipid balance, enhances colour depth, revives softness and elasticity, and improves hydrophobic behaviour — all with a clean, even finish.

⸻

Signature Advantages

• Restores natural softness and elasticity without shine

• Deepens colour for a richer, more uniform appearance

• Improves water repellency and long-term stability in daily wear

• Safe for suede, nubuck, and selected aniline surfaces requiring delicate leather care

⸻

Created for Professionals

• Suede and nubuck footwear — sneakers, boots, premium fashion shoes

• Furniture and upholstery made from open-pore leather

• Bags, small leather goods, wallets, accessories

• Outerwear and luxury fashion items requiring gentle restoration and softening

Always test on a inconspicuous area. Apply evenly and avoid runs. Allow to dry naturally and brush the nap after drying.

⸻

Compatible Leather Types

Designed for suede, nubuck, and selected aniline leathers.

(Not suitable for coated or pigmented leather types.)

⸻

Refined Result

Evenly softened fibres, restored colour richness, improved hydrophobic behaviour, and a revived, luxurious nap with enhanced tactile appeal.

⸻

Application Notes

Dry-brush the surface and clean with LeTech Suede & Nubuck Cleaner. Shake well, apply in a thin, even layer, allow to air-dry, and finish by brushing the nap to refine the texture.

LETECH SURFACE REPAIR

A professional water-based micro-filler designed for superficial cracks, light creasing, and minor surface defects on leather. It levels micro-fractures, stabilises the finish, and creates a clean, matte surface ready for recolouring and top coating.

⸻

Signature Advantages

• Levels superficial cracks and micro-defects in thin, controllable layers

• Smooth sanding and feather-edge blending for invisible transitions

• Water-based, low-build formula that preserves natural texture

• Creates a matte, uniform, paint-ready surface for colourants and top coats

⸻

Created for Professionals

• Automotive seat bolsters and armrests with light cracking

• Steering wheels with micro-checking

• Furniture contact zones with minor craze lines

• Bags, accessories, and small leather goods with edge micro-defects

Designed strictly for superficial damage.

(Not suitable for deep cuts or structural issues — use Heavy Filler / Light Filler.)

⸻

Compatible Leather Types

Suitable for pigmented/finished leather, corrected-grain leather, and semi-aniline (spot-test required).

(Not intended for suede or nubuck.)

⸻

Refined Result

A smooth, even, stabilised finish layer with minimal texture build — perfectly prepared for Leather Colourant and Leather Top Coat (optionally enhanced with X-Guard Additive).

⸻

Application Notes

Apply in very thin micro-layers using a flexible spatula.

Air-dry or use gentle warm air.

Sand lightly between coats to achieve a feather-edge.

Finish by recolouring and sealing with compatible LeTech systems.

LETECH LEATHER SLIP ADDITIVE

A professional tactile modifier for water-based leather top coats. It reduces squeak and surface friction, enhances glide, and delivers a soft, silky touch — all without altering colour, gloss, or the visual character of the finish.

⸻

Signature Advantages

• Reduces squeak and contact noise in high-movement areas

• Adds a premium soft-touch feel and smooth glide

• Lowers static and dynamic friction for a refined tactile experience

• Water-based system that preserves visual appearance and colour clarity

⸻

Created for Professionals

• Automotive & aviation interiors — quieter bolsters, armrests, smoother touch

• Furniture & upholstery — reduced squeak and enhanced premium feel

• Leather goods — elevated glide for bags, jackets, and small accessories

Perfect for premium interiors and luxury leather items where tactile refinement is essential.

⸻

Compatible Products

Designed to mix into water-based leather top coats, especially matte systems:

• Leather Top Coat Mat

• Leather Top Coat Mat X2

For combinations with other additives, prepare a small test batch to verify behaviour.

⸻

Refined Result

A smooth, quiet, soft-touch surface with improved glide and no visual alteration — offering a more luxurious tactile profile on both new and restored leather finishes.

⸻

Application Notes

Add gradually to the selected top coat until the desired slip level is reached.

Mix thoroughly, test on a sample panel, then apply per the top coat’s standard workflow.

Apply in thin, even layers and allow proper flash/cure times.

LETECH LEATHER BRUSH PREMIUM

A premium beech wood leather cleaning brush with natural bristles engineered for safe, deep and even cleaning. Gentle on the surface, effective on dirt — the perfect tool for professional and home leather care.

⸻

Signature Advantages

• Natural bristles — delicate yet effective on all leather types

• Solid beech wood block with ergonomic grip

• Ideal for deep cleaning and grain penetration

• Creates rich foam with liquid and foaming cleaners

• Non-abrasive, safe for fine and finished leather

⸻

Created for Professionals

• Automotive interiors: seats, bolsters, steering wheels, trims

• Furniture & upholstery: sofas, chairs, cushions

• Leather goods & apparel: bags, shoes, jackets, accessories

Designed to complement professional cleaning routines where controlled agitation and surface safety matter.

(Not suitable for suede or nubuck — use a dedicated suede brush.)

⸻

Compatible Leather Types

Safe for:

• Pigmented / finished leather

• Coated leather

• Aniline & semi-aniline

• PU / synthetic leather

A small-area test is always recommended before first use.

⸻

Refined Result

Enhanced cleaning efficiency, deeper grain penetration, smoother foam distribution and a perfectly prepared surface ready for conditioning, protection or recolouring. Leaves the leather clean, fresh and evenly treated.

⸻

Technical Specifications

Handle: Natural beech wood, polished, ergonomic

Bristles: Natural fibre, medium-soft

Dimensions: ≈ 135 × 43 × 19 mm

Bristle length: ≈ 19 mm

Surface safety: Non-abrasive; safe for delicate grain

Durability: Long service life — keep dry and clean after use

⸻

How to Use (Overview)

• Dust off loose particles with a cloth

• Apply cleaner to leather or directly onto the brush

• Work in gentle circular or linear motions

• Wipe residue with a clean terry towel

• Allow the brush to dry naturally, bristles facing down or upright

⸻

Tips & Related Products

• Pair with Foam Leather Cleaner or Leather Ultimate Cleaner for maximum effect

• Follow with Leather Protection Cream X-Guard for long-term defence

• Maintain the brush by drying it thoroughly after each use

LETECH FOAMING BOTTLE (EMPTY)

A reusable professional foaming dispenser designed to create dense, stable foam from water-based cleaners. Ensures safer, more controlled cleaning while reducing product consumption across leather, fabric, Alcantara, vinyl and plastic surfaces.

⸻

Signature Advantages

• Produces rich, stable foam for controlled application

• Enhances cleaning efficiency while reducing over-wetting

• Safe for delicate materials when used with water-based cleaners

• Durable, reusable design for everyday detailing workflow

⸻

Created for Professionals

• Automotive interiors: leather seats, trim, steering wheels, plastic panels

• Furniture & upholstery: sofas, armchairs, cushions, Alcantara surfaces

• Leather goods & apparel: bags, shoes, jackets, accessories

Designed to integrate seamlessly into LeTech cleaning routines for precision and material safety.

⸻

Recommended Pairings

• Leather Ultimate Cleaner — leather upholstery

• Fabric & Alcantara Cleaner — textiles and Alcantara

• Suede & Nubuck Cleaner — apply foam on applicator; avoid direct soaking

• Vinyl & Plastic Cleaner — dashboards, trim and interior plastics

Use with water-based, foam-capable products only. Avoid solvents and flammable liquids.

⸻

Technical Specifications

Type: Manual empty foaming bottle

Capacity: 200 ml / 6.76 fl oz

Use scope: Leather, fabric/Alcantara, vinyl, plastic

Benefits: Controlled foaming, lower product consumption, safer cleaning

Chemical compatibility: Water-based cleaners only

Care: Rinse with warm water after use; allow to dry with cap open

⸻

Tips & Care

• Remove loose dust before applying foam

• Prime the pump until dense, uniform foam forms

• On sensitive surfaces, apply foam to the applicator first

• Rinse bottle and pump after each use to maintain foaming quality

LETECH LEATHER COLOUR RESTORER

An advanced all-in-one liquid leather colour repair system powered by Vibrant Plus+ technology. Repairs minor defects, restores colour depth and uniformity, and delivers a durable, flexible finish — all in a single, professional-grade compound.

⸻

Signature Advantages

• All-in-one system: adhesion + colour + finish + tactile modifiers

• Vibrant Plus+ technology for vivid, UV-stable saturation

• High coverage with thin, even layers

• Flexible, pleasant touch — no cracking or peeling

• Professional performance on natural & synthetic leather

⸻

Created for Professionals

• Automotive interiors: seats, bolsters, steering wheels, high-touch areas

• Furniture & contract: sofas, chairs, commercial upholstery

• Leather goods: bags, jackets, wallets, footwear

Perfect for projects where simplified workflow, reliable colour uniformity and durable finishing are essential.

(Not suitable for suede or nubuck.)

⸻

Compatible Leather Types

Optimised for:

• Pigmented / finished leather

• Coated leathers

• PU / artificial leather

• Waterborne finishing systems

A small-area test is recommended to assess absorption and shade accuracy.

⸻

Refined Result

A smooth, flexible, wear-resistant colour film that blends naturally with the surrounding leather. Vibrant Plus+ ensures rich tone, stable saturation and a matte–satin professional finish. Ideal for rejuvenating faded, scuffed or abraded surfaces.

⸻

Technical Specifications

System: All-in-One (adhesion + colour + finish), Vibrant Plus+

Properties: High opacity; flexible; UV- and wear-resistant; natural tactile feel

Application: Sponge, brush, roller, or spray (thin coats)

Spray settings: 0.5–1.2 mm nozzle; 1.1–8 bar; dry filtered air; pre-filter through 190 µm mesh

Dilution: Distilled water if viscosity adjustment is required

Durability enhancer: Cross-Linker X (10–20 %)

Volumes: 100 / 200 / 500 ml

⸻

How to Use (Overview)

• Prep: Clean, degrease, remove unstable finish layers.

• Apply: Build multiple thin coats for uniform colour; avoid heavy passes.

• Enhance: Add Cross-Linker X for maximum chemical & mechanical resistance.

• Finish: Optionally seal with Leather Top Coat for premium long-term protection.

⸻

Tips & Related Products

• Degrease thoroughly — absorption and adhesion depend on clean fibre structure.

• For high-wear zones, combine with Cross-Linker X (10–20 %).

• Seal with Leather Top Coat (Mat, Satin, or Gloss) for extended life.

• For defect correction before recolouring: Surface Repair / Light Filler / Heavy Filler.