Sort by:
6 products
6 products
Foaming Bottle (Empty)
Reusable foaming bottle engineered to create dense, stable foam from water-based cleaners. Delivers safer, more efficient cleaning and helps reduce product consumption on leather, fabric, Alcantara, vinyl and plastic.
What It Does
The LeTech Foaming Bottle turns compatible liquids into thick foam, improving contact time, lifting soil gently, and preventing over-wetting of delicate surfaces. Compared to spraying liquid directly, foam application offers better control and lower consumption during detailing and restoration workflows.
Designed to pair with LeTech cleaners and other foaming liquids used in automotive, furniture and leather-goods care routines.
Recommended Pairings
- Leather Ultimate Cleaner (leather upholstery).
- Fabric & Alcantara Cleaner (textiles and Alcantara).
- Suede & Nubuck Cleaner (use foam on applicator; avoid soaking).
- Vinyl & Plastic Cleaner (trim and interior plastics).
Use water-based, foam-capable products. Avoid solvents and flammables.
Technical Specifications
| Parameter | Value |
|---|---|
| Type | Empty foaming bottle (manual pump) |
| Capacity | 200 ml / 6.76 fl oz |
| Use scope | Leather, fabric/Alcantara, vinyl, plastic (water-based cleaners) |
| Benefits | Foam control, reduced consumption, safer cleaning of delicate finishes |
| Chemical compatibility | Water-based only; solvent use not recommended |
| Care | Rinse with warm water after use; allow to dry with cap open |
Tips & Care
- Pre-vacuum or wipe loose dust before applying foam.
- Prime the pump until a dense, uniform foam appears; work foam with a brush or sponge.
- On sensitive materials, apply foam to the applicator first rather than directly on the surface.
- Rinse the bottle/pump with warm water after each session to maintain stable foaming action.
Colour Wheel (13 cm)
Compact professional colour wheel for fast, reliable colour matching, mixing and neutralising in leather restoration workflows. Purpose-built for dye and pigment work on automotive, furniture and leather goods projects.
What It Does
The Colour Wheel (13 cm) visualises primary, secondary and tertiary relations to help you predict results when tinting leather colourants and dyes. It highlights complementary pairs to cancel unwanted tints, and guides split-complementary, triadic and analogous schemes for precise shade building.
Use it to neutralise green/blue/red casts, tune warmth or coolness, and plan mixes before committing material — saving time, product and rework.
Professional Applications
- Automotive: steering wheels, bolsters and panels where ageing shifts hue.
- Furniture: seat cushions and armrests with uneven fade/undertone.
- Leather goods: bags, jackets and footwear requiring subtle tone correction.
How It Helps with Leather Work
- Identify undertones and choose the correct complementary neutraliser.
- Plan pigment ratios for coverage vs. chroma with minimal greying.
- Translate customer shade targets into reproducible mixes for your system.
Technical Specifications
| Parameter | Value |
|---|---|
| Diameter | 13 cm (5.12 in) |
| Format | Printed reference colour wheel; compact training aid |
| Content | Primary/secondary/tertiary segments; complements; split-complementary; triadic; analogous; basic neutralisation guide |
| Material | Coated card or laminated stock — requires verification |
| Sides | Front: hue relationships; Back: mixing/neutralising aide — requires verification |
| Use context | Leather dyes & colourants (waterborne/solventborne) and pigment pastes |
If you need a larger size for classroom use, a 23 cm variant exists on the market; your SKU here is the compact 13 cm model.
Tips & Related Products
- Keep notes of successful mixes (ratios by ml or drops) under standard lighting (D65) for repeatability.
- Validate matches after drying and light heat set — wet appearance can differ from final film.
- Pair with Leather Colourant and Leather Top Coat for production-ready results.
Leather Brush Premium
High-quality beech wood brush with natural bristles, crafted for safe and effective deep cleaning of leather surfaces. Designed for gentle yet thorough removal of embedded dirt and contaminants on all leather types.
What It Does
Leather Brush Premium is a precision tool designed for deep and gentle leather cleaning. The durable beech wood block combined with soft natural bristles effectively removes ingrained dirt without scratching or damaging the surface.
Ideal for use with foaming or liquid leather cleaners — helps create rich foam, penetrate textured grain, and ensure even cleaning. After brushing, simply wipe away residue with a soft cloth and follow with protection or conditioning.
Professional Applications
- Automotive Interiors: seats, door panels, steering wheels, and trim.
- Furniture & Upholstery: sofas, armchairs, cushions, and leather décor.
- Leather Goods & Apparel: bags, shoes, jackets, and accessories.
Compatible Leather Types
Suitable for pigmented, coated, aniline, semi-aniline and synthetic (PU) leather surfaces.
Not recommended for suede or nubuck — use a dedicated suede brush instead.
Technical Specifications
| Parameter | Value |
|---|---|
| Handle material | Natural beech wood (polished, ergonomic) |
| Bristles | Natural fibre, medium-soft for delicate cleaning |
| Approx. dimensions | Length 135 mm × Width 43 mm × Height 19 mm; bristle length ~19 mm |
| Surface safety | Non-abrasive on finished leather; safe for fine grain |
| Durability | Long service life; maintain by drying thoroughly after each use |
Usage Tips & Care
- Remove loose dust with a cloth before brushing.
- Apply cleaner directly to the surface or onto the brush for foaming action.
- Work gently in circular or linear motions along the grain.
- Wipe away residue with a clean terry towel.
- Allow the brush to dry naturally, bristles facing down or upright.
- Use regularly to prevent dirt build-up and maintain the original appearance of leather.
For best results, pair with LeTech leather cleaners and protection creams.
LeTech Leather Grain Copier Gun
LeTech Leather Grain Copier Gun is a professional manual dispenser designed for 50 ml dual-component cartridges used with the Leather Grain Copier system. It delivers clean, controlled flow and precise texture reproduction with a static mixing nozzle.
What It Does
The Leather Grain Copier Gun ensures accurate extrusion of Base and Hardener at a 1:1 ratio for precise leather-grain replication. Its mechanical trigger provides stable pressure and smooth flow, preventing voids and over-application.
Optimized for the Leather Grain Copier 50 ml system — mix, press, and cure to achieve factory-level texture reproduction.
Process Highlights
Technical Specifications
| Parameter | Value |
|---|---|
| Cartridge Format | 50 ml dual-component (Leather Grain Copier) |
| Nozzle | Static mixing nozzle |
| Drive | Manual trigger with controlled pressure |
| Compatibility | Leather Grain Copier Base + Hardener |
LeTech Leather Grain Copier 50 ml
LeTech Leather Grain Copier 50 ml is a professional two-component compound for creating precise leather grain molds (“grain pillows”) and transferring the original texture onto repaired areas. It captures fine pores and relief for near-invisible finishing on leather and vinyl.
What It Does
Leather Grain Copier 50 ml allows you to take an imprint from an intact area and reproduce that exact grain over filled or welded zones. After 1:1 mixing through a static nozzle, the compound cures to an elastic mold that mirrors the original micro-relief, enabling seamless blending after recolouring. The LeTech Leather Grain Copier 50 ml cartridge integrates into standard workshop workflows for consistent, repeatable texture results.
Use after rebuilding the substrate with Heavy/Light Filler or Vinyl & Leather Weld to restore factory-like texture continuity.
Process Highlights
Compatible Materials
Finished/pigmented leather and many vinyl/PU artificial leather surfaces. Always test heat/adhesion tolerance on an inconspicuous area first.
Not for suede or nubuck.
Technical Specifications
| Parameter | Value |
|---|---|
| Chemistry | Two-component molding compound for grain imprint |
| Mix ratio | 1:1 (Base : Hardener) via static mixing nozzle |
| Consistency | Flows to capture micro-relief; cures to flexible, durable mold |
| Cartridge volume | 50 ml / 1.69 fl oz (combined) |
| Working/Cure time | Fast set — refer to TDS |
| Recommended tools | Dispensing gun + static nozzle; release film |
| System use | With Leather Heavy/Light Filler, Vinyl & Leather Weld, Colourant, Top Coat |
Leather Grain Copying Set
Professional kit for creating precise leather grain molds (“grain pillows”) from undamaged areas and transferring the texture onto repaired zones. The two-component system produces an elastic, dimensionally accurate imprint, ensuring seamless, invisible restoration on leather and vinyl.
What It Does
Leather Grain Copying Set allows professionals to duplicate original leather grain from an intact area and reproduce it over filled or rebuilt zones. Mixed at a 1:1 ratio, the compound cures into a flexible mold that precisely captures pores and relief, enabling perfectly blended texture after recolouring.
The resulting “grain pillow” ensures the repaired surface visually and tactilely matches the surrounding factory texture — essential for high-end automotive, furniture and leather-goods restoration.
Kit Components
- Leather Grain Copier – Base (two-component formula)
- Leather Grain Copier – Hardener (1:1 mix with Base)
- Dispensing Gun for precise 1:1 extrusion and control
- 2 Spare Mixing Nozzles for quick replacement during work
- Release film and spatula — for clean mold formation and handling
All components packed in a compact professional case; total content verified for current SKU.
Professional Applications
- Automotive: bolster texture repair, steering wheel areas, dashboards, seat panels.
- Furniture: textured corners, armrests, cushion edges after filler work.
- Leather goods: grain restoration on bags, wallets and premium accessories.
Compatible Materials
Finished/pigmented leather and vinyl/PU artificial leather. Always test on an inconspicuous area for heat and adhesion tolerance.
Not intended for suede or nubuck.
Technical Specifications
| Parameter | Value |
|---|---|
| Chemistry | Two-component molding compound for grain imprint |
| Mix ratio | 1:1 (Base : Hardener) via mixing nozzle |
| Consistency | Flowing compound capturing fine detail; cures to flexible mold |
| Dispensing method | Cartridge + mixing nozzle using included dispensing gun |
| Working/Cure time | Fast curing (minutes) — requires verification in TDS |
| Typical cartridge volume | 2 × 50 ml / 1.69 fl oz (Base + Hardener) |
| Use with | Leather Heavy/Light Filler, Vinyl & Leather Weld, Colourant, Top Coat |
Tips & Workflow Integration
- Make the mold on a clean, stable area — avoid seams or overstretched zones.
- Keep the compound flat during curing to preserve accurate relief geometry.
- Transfer texture before recolouring; fine-tune the grain by slight sanding if permitted by TDS.
- Finish with **Leather Colourant** and **Top Coat** to unify tone and sheen.
Exact press time, release medium, and heating limits — refer to TDS.
EXPLORE OUR BESTSELLERS
