Sort by:
20 products
20 products
Leather Light Filler
Professional, water-based repair compound for superficial leather damage — scratches, scuffs, light cracks and worn edges. Creamy, homogeneous consistency spreads cleanly, bonds strongly to leather and forms a flexible, wear-resistant repair layer ready for recolouring.
What It Does
Leather Light Filler is formulated to fill shallow defects and restore a smooth, even surface before colour work. The compound wets and grips leather fibres, cures quickly, and remains elastic so the repair withstands bending without cracking.
Optimised for thin, controlled layers applied with a spatula or soft tool. Ideal on seat bolsters, edges, corners and other high-wear areas prior to primer/colour/top-coat.
Professional Applications
- Automotive interiors: bolster scuffs, light cracks, steering-wheel touch zones.
- Furniture: worn edges, surface scratches, local scuff repair.
- Leather goods: bags, shoes and accessories with superficial defects.
Compatible Leather Types
For finished/pigmented leather and many coated PU/artificial leather surfaces. Always test on an inconspicuous area.
Not recommended for suede or nubuck.
Technical Specifications
| Parameter | Value |
|---|---|
| Base | Water-based polymer compound (creamy, homogeneous) |
| Typical defects | Scratches, scuffs, shallow cracks, worn edges |
| Application | Spatula/squeegee in thin layers; feather the edges |
| Drying | Air or warm-air assist; fast drying — verify exact temperature/time |
| Layering | Build with multiple thin coats; fully dry each layer |
| Overcoating | Prime → recolour (Leather Colourant) → protect (Top Coat) |
| Available volumes | 30 ml / 1.01 fl oz; 100 ml / 3.38 fl oz |
Exact sanding guidance and heat settings — requires verification (refer to TDS). Volumes confirmed on retail listings.
Tips & Related Products
- Degrease and remove weak finish before filling to maximise adhesion.
- Apply several thin coats rather than one thick coat to avoid texture build-up.
- For deeper defects use Leather Heavy Filler, then finish with Light Filler for final levelling.
- Replicate grain with Leather Grain Copier if required before recolouring.
Vinyl & Leather Weld (100 ml)
Vinyl & Leather Weld — premium repair compound for vinyl and synthetic leather. The heat-activated formula turns transparent in seconds, matching the original texture and flexibility for an almost invisible repair.
What It Does
The compound fuses with the substrate under heat, becomes optically clear, and follows the material’s movement without cracking. Using a prepared grain print, the repair blends into the surface so the patch is hard to detect even at a close distance.
Highlights
- Elastic flexibility: the repaired area stays as supple as the original.
- High wear resistance: engineered to withstand everyday friction.
- ~40 sec heat cure: fast activation with heat gun or iron.
- Precise grain copy: pairs with Leather Grain Copier for factory-like texture.
Applications
- Synthetic leather & eco-leather: automotive interiors, furniture, accessories, yachts, aviation.
- Vinyl & plastics: dashboards, trim panels, decorative elements.
- Foam & polyurethane: restoring cushioned seating.
How To Use (Summary)
- Prepare: clean and degrease with Leather Ultimate Cleaner and Leather Alcohol Cleaner. Dry fully.
- Trim: smooth edges; for through-holes, add an internal backing cushion.
- Initial fill: fill ~50% with Vinyl & Leather Weld; heat with hair dryer and iron until transparent.
- Copy the grain: after cooling, apply a second layer and press the prepared texture print (Leather Grain Copier).
- Finish: heat through thermal paper, cool completely, then colour and seal with Leather Colourant + Leather Top Coat if needed.
Storage
Store tightly sealed in a dry, ventilated place away from direct sunlight at 5–35 °C, relative humidity up to 80 %. Shelf life: 3 years from production date.
Technical Specifications
| Parameter | Value |
|---|---|
| Volume | 100 ml |
| Curing time | ≈ 40 seconds (heat-activated) |
| Packaging | Tin container |
| Shelf life | 3 years from manufacture |
| Leather types | Aniline, semi-aniline, pull-up, vegetable-tanned, pigmented, artificial |
| Applications | Cars, furniture, aviation, marine, footwear, bags, upholstery |
Tips & Related Products
- Use the Leather Grain Copier to replicate grain for an invisible repair.
- After repairing, recolour with Leather Colourant and protect with Leather Top Coat for lasting durability.
Why LeTech
LeTech is a UK-based brand trusted by professionals. Vinyl & Leather Weld combines advanced chemistry with practical workflow — strong like factory material, with superior elasticity and wear resistance. Our products are used in automotive, furniture, aviation and marine industries to extend the life of leather and vinyl goods.
Training or turnkey solutions? LeTech Academy and our specialists will help you master professional vinyl and leather restoration.
Leather Cross Linker X
Professional fast-acting hardener for waterborne polyurethane leather systems. Enhances film strength, rub fastness and chemical resistance in primers, colourants and top coats while maintaining flexibility.
What It Does
Leather Cross Linker X increases the degree of crosslinking in waterborne PU finishes, creating a denser polymer network and a tougher, more durable film. The result is improved wet and dry rub fastness, better resistance to water and household cleaners, and faster return-to-service.
Designed to be blended into the host component (primer / colourant / top coat) immediately before application. Mix only what you plan to use.
Professional Applications
- Automotive refinishing: bolster durability of seats and high-touch areas.
- Furniture finishing & restoration: improve wear and cleaning resistance.
- PU/artificial leather goods: enhance top-coat performance for bags, footwear and accessories.
Compatible Leather Types
Optimised for coated/pigmented leather and PU/artificial leather within waterborne PU systems.
Not recommended for suede or nubuck.
Technical Specifications
| Parameter | Value |
|---|---|
| Function | Crosslinker / hardener for waterborne PU leather finishes |
| Use with | Leather Primer, Leather Colourant, Leather Top Coat (waterborne PU) |
| Recommended dosage | requires verification (dose per official TDS) |
| Pot life after mixing | requires verification |
| Activation | Warm-air assist between coats to speed cure (verify exact regime) |
| Available volume | 100 ml / 3.38 fl oz |
| Line | LeTech Expert Line |
Tips & Related Products
- Pair with Leather Primer to reinforce adhesion on challenging substrates.
- Use with Leather Colourant for durable recolouring workflows.
- Finish with Leather Top Coat for optimal surface protection.
Exact mixing ratios, storage conditions and VOC data — requires verification (check TDS/SDS).
Leather Masking Fluid
Professional water-based masking compound for protecting and preserving stitching during leather recolouring. Forms a thin film over the thread to prevent overspray and colour transfer — then peels off cleanly without residues when work is done.
What It Does
Leather Masking Fluid shields decorative and contrast stitching so you can spray or recolour adjacent leather panels with confidence and precision. The film adheres well and remains flexible, keeping the thread safe from dye mist and overspray. After painting, the mask rolls off with your fingers, leaving the thread’s original colour and texture intact.
Essential for projects with contrast stitching where crisp edges and clean separation define the final look.
Where It Works
- Automotive, aviation, marine interiors
- Furniture and upholstery
- Footwear, bags and leather accessories
- Craft & custom leather projects
Material focus: painted/finished leather and artificial leather seams and stitching.
Technical Specifications
| Parameter | Value |
|---|---|
| Type | Water-based masking fluid for stitching protection |
| Core effects | Shields thread from overspray; preserves colour & texture; rolls off cleanly |
| Set behaviour | Fast setting; forms a thin protective film |
| Adhesion/Elasticity | High adhesion with elastic behaviour for safe removal |
| Application | Nozzle bottle / spatula to shape over the seam |
| Recommended use | Mask stitching before spraying or recolouring adjacent leather panels |
| Available volumes (US store) | 100 ml |
Tips & Related Products
- Apply a slightly raised bead over the seam for easier, one-piece removal.
- If product touches leather beside the seam, pull it back to the thread with a plastic spatula before it sets.
- Keep a masking tape or pre-taped film at hand to protect large adjacent areas and speed up prep.
Safety Notes
Always follow manufacturer guidance and perform a small test in a hidden area to confirm compatibility and removal behaviour before full application.
Why LeTech
Engineered for professional leather restoration, LeTech masking solutions help achieve crisp lines, protect high-value stitching and deliver a refined finish that stands up to scrutiny.
Leather Ink & Dye Transfer Remover
Highly effective, leather-safe solution for removing stubborn ink and jeans dye transfer from finished leathers. Acts fast, works clean, and protects the finish when used as directed.
What It Does
Loosens ink and dye so contamination transfers to your swab or pad — with minimal mechanical friction. Optimised for finished/pigmented leather in automotive interiors, furniture, bags, footwear, and apparel.
Highlights
- Pen ink, marker/felt-tip traces, and jeans dye transfer.
- Gentle to the finish when used correctly; no harsh solvent smell.
- Efficient workflow — a small amount goes a long way.
Usage Rate (Indicative)
- Car seat jeans dye transfer — up to ~10 spot removals from 100 ml.
- Individual pen marks — 100+ small traces.
Workflow
Moisten a cotton swab (or nonwoven pad for larger areas), gently roll along the stain to lift it onto the tool, refresh the swab frequently. After drying, clean residues with LeTech Leather Ultimate Cleaner, then protect with Leather Protection Cream X-Guard Protection.
Leather Liquid Degreaser
Professional liquid degreaser for leather, vinyl and PU. Effectively removes oils, silicones, residues and embedded contamination from the surface and pores without damaging the finish — essential for proper adhesion of primers, fillers, and colour systems.
What It Does
Leather Liquid Degreaser penetrates pores and capillaries of leather, lifting oils and silicones that interfere with adhesion. Unlike solvent-based degreasers, its advanced waterborne formula with active absorbents cleans effectively yet gently, without causing drying or whitening of the surface.
Used as the first step in all repair and recolouring workflows to guarantee clean, stable adhesion of Leather Binder, Fillers, Primer and Colourant.
Professional Applications
- Automotive: seats, bolsters, steering wheels and trim panels before colour work.
- Furniture: sofas, armrests and cushions for pre-clean preparation.
- Leather goods: bags, footwear, jackets prior to restoration or finishing.
Compatible Leather Types
Suitable for all finished, pigmented, semi-aniline and synthetic (PU) leather surfaces. Always test on an inconspicuous area first. Avoid use on suede and nubuck.
Technical Specifications
| Parameter | Value |
|---|---|
| Type | Water-based liquid degreaser |
| Action | Removes oils, silicones, waxes and surface contamination |
| Application | Apply with cloth or sponge; wipe gently; repeat if necessary |
| Drying time | 2–5 minutes (air dry) |
| Use before | Leather Binder, Fillers, Primer, Colourant, Top Coat |
| Available volumes | 200 ml / 6.76 fl oz · 500 ml / 16.91 fl oz · 1 L / 33.81 fl oz · 5 L / 169.07 fl oz |
Tips & Related Products
- Apply with lint-free cloth; replace cloth as it becomes soiled.
- Repeat degreasing until no residue appears on the cloth.
- Follow immediately with Leather Binder or Leather Primer for best adhesion.
Leather Degreaser
Professional gel-based formula for extracting oil, grease, and sebum from leather without damaging its structure. Suitable for both restoration and preparation before dyeing or refinishing.
What It Does
Leather Degreaser is a thick, absorbing gel designed to draw deeply embedded oils and greasy contaminants out of leather. Once dry, the gel turns into a powder, lifting contaminants to the surface for easy removal. Its indicator effect shows areas with remaining contamination via visible discoloration, guiding precise reapplication.
This product is an essential preparatory step before recoloring leather, especially in cases where natural or body oils have compromised surface absorption.
Professional Applications
- Automotive: Removes grease from steering wheels, headrests, and seats.
- Furniture: Treats oil stains on armrests, cushions, and frequently touched areas.
- Garments: Degreases leather jackets, collars, and accessories affected by skin oils.
- Restoration: Critical before recoloring or restoring aniline and semi-aniline leather.
Can be used on aniline, semi-aniline, pull-up, vegetable-tanned, waxed leather, suede, and nubuck.
Compatible Leather Types
Leather Degreaser is compatible with:
- Aniline leather
- Semi-aniline leather
- Pull-up leather
- Vegetable-tanned leather
- Waxed and oily leather
- Suede and nubuck
Not suitable for synthetic leathers or coated bicast surfaces.
Technical Specifications
| Parameter | Value |
|---|---|
| Type | Thick gel degreaser with indicator effect |
| Compatible leathers | Aniline, semi-aniline, vegetable-tanned, suede, nubuck, pull-up |
| Application | Before dyeing or refinishing; for stain removal and surface preparation |
| Application method | Brush or spatula; let dry, vacuum or brush off |
| Indicator | Yes — discolored residue shows contaminated areas |
| Available volumes | 380 ml / 12.85 fl oz |
Tips & Related Products
- Always pre-clean with Leather Ultimate Cleaner before degreasing.
- Use Leather Degreaser before applying dyes or protective finishes.
- For best results, follow with Leather Protection Cream post-dyeing.
Why LeTech
LeTech is a UK-based leather care brand trusted in the automotive, furniture, and fashion industries. Our degreasing solutions are engineered to be safe, effective, and compatible with professional leather restoration systems.
Combine with LeTech colourants and protectants for complete leather renewal.
Leather Primer
Professional water-based adhesion primer that promotes strong bonding between leather/PU substrates and colour systems. Levels porosity, improves wetting, and creates a receptive, uniform surface for durable recolouring and protective top coats.
What It Does
Leather Primer anchors the colourant to the substrate by penetrating the micro-relief and forming a thin, flexible intercoat. It evens absorption on repaired zones (fillers/binder) and intact areas, helping achieve uniform colour build, improved scratch resistance and long-term durability.
Essential step before applying Leather Colourant and Top Coat, especially on high-wear panels and steering wheels.
Professional Applications
- Automotive: bolsters, steering wheels, panels after prep and filler work.
- Furniture: seating areas and armrests for even recolouring and wear resistance.
- Leather goods: bags, footwear, accessories where flexible adhesion is critical.
Compatible Leather Types
Finished/pigmented leather, many semi-aniline and PU/artificial leather surfaces prepared with Degreaser/Prep. Always test on a hidden area. Not for suede or nubuck.
Technical Specifications
| Parameter | Value |
|---|---|
| Type | Water-based adhesion primer for leather/PU |
| Application | Sponge or spray in thin, even coats; allow flash between layers |
| Drying | Air or gentle warm-air assist; proceed when dry to the touch |
| System workflow | Degreaser → Prep → (Binder/Fillers if needed) → Leather Primer → Colourant → Top Coat |
| Film properties | Flexible, non-brittle intercoat; enhances adhesion and colour uniformity |
| Available volumes | 100 ml / 3.38 fl oz · 200 ml / 6.76 fl oz · 500 ml / 16.91 fl oz · 1 L / 33.81 fl oz · 5 L / 169.07 fl oz |
Tips & Related Products
- Ensure thorough degreasing and keying (Leather Liquid Degreaser + Leather Prep) before priming.
- Apply multiple light coats rather than one heavy coat for best flow and level.
- For extreme wear areas, pair the system with Cross-Linker (in colour/top coat) and finish with the desired sheen.
Leather Glue WB
Professional water-based polyurethane adhesive for leather repair. Delivers a strong, flexible bond without stiffening the substrate — ideal for fixing delamination, bonding patches/backing pieces and stabilising crack lines before filling and recolouring.
What It Does
Leather Glue WB wets the leather fibres and forms an elastic polyurethane bond that resists peeling and micro-cracking under flex. Use it to re-laminate lifted finish layers, fix lining/substrate separations, set reinforcement patches and close micro-splits prior to filling.
Designed for professional restoration workflows — integrates cleanly into the “glue → fill → colour → top coat” process.
Where It Works
- Automotive & aviation interiors (seat bolsters, armrests, panels)
- Furniture & upholstery (delamination, edge repairs)
- Leather goods & apparel (patching from the inside, seam stabilisation)
Suitable for finished/pigmented and corrected-grain leathers. Not intended for suede/nubuck.
Technical Specifications
| Parameter | Value |
|---|---|
| Type | Water-based polyurethane adhesive (WB) |
| Bond character | Strong, flexible; designed for dynamic flex without film brittleness |
| Use cases | Delamination repair, patch/backing bonding, crack-line stabilisation |
| Application | Brush/spatula; thin, even layer on both surfaces if required |
| Open time | Allow partial tack to develop; press firmly; maintain contact until set |
| Cure | Let bond fully develop before mechanical stress and further finishing |
| System compatibility | LeTech fillers (Light/Heavy), Leather Colourant, Leather Top Coat |
| Available volume (US store) | 100 ml |
Tips & Related Products
- Surface prep: clean and degrease the area before bonding to maximise adhesion.
- Thin coats: prefer a thin, uniform layer; avoid pools that slow drying.
- Pressure: maintain steady pressure (clips/tape/weight) until initial set.
- Workflow: after cure, level with Surface Repair / Light Filler / Heavy Filler, recolour with Leather Colourant, seal with Leather Top Coat.
Safety Notes
Work in a ventilated area. Avoid contact with eyes/skin. Keep container closed when not in use. Always test on a hidden area before full application.
Why LeTech
LeTech repair chemistry is engineered for precision, durability and a clean finishing sequence. Leather Glue WB offers secure, flexible bonding that supports professional-grade results across automotive, furniture and leather goods restoration.
Leather Binder
A professional water-based polymer binder engineered to re-strengthen fatigued leather fibres. Penetrates into the fibre matrix, binds loose fibres together and restores integrity on worn, frayed, or weakened leather — the ideal base layer before fillers and colour restoration.
What It Does
Leather Binder consolidates worn leather by saturating and binding the inner fibre structure, making weak areas tougher and less prone to tearing. Use it to stabilise surfaces prior to applying repair compounds and colour systems, or as a standalone solution for minor wear.
Apply in thin, even layers with a sponge or brush; avoid excessive foaming. Dry each layer with warm air at approximately 40–60 °C before applying the next one for optimum consolidation.
Professional Applications
- Pre-repair consolidation: strengthen frayed, thinned leather before using Light/Heavy Fillers.
- Minor wear treatment: reduce fibre fuzz and restore surface integrity on edges and bolster areas.
- System foundation: create a uniform, stable base for primer, colourant and top coat.
Compatible Leather Types
Intended for smooth finished/pigmented leather and many coated PU/artificial leather surfaces used in automotive, furniture and leather goods. Always test on an inconspicuous area first.
Not suitable for suede or nubuck.
Technical Specifications
| Parameter | Value |
|---|---|
| Type | Water-based polymer binder for fibre consolidation |
| Application tools | Sponge or brush; thin coats; avoid foaming |
| Drying | Warm air assist approx. 40–60 °C between layers |
| Layering | Apply multiple layers as needed, fully drying each layer |
| Use cases | Pre-filler reinforcement; minor wear repair; surface stabilisation |
| Available volumes | 200 ml / 6.76 fl oz; 500 ml / 16.91 fl oz |
| System compatibility | LeTech Light/Heavy Filler, Primer, Colourant, Top Coat |
Drying guidance 40–60 °C and multi-layer workflow from the LeTech product description; volumes based on retail listings. Please verify exact packaging for your region.
Tips & Related Products
- Degrease and remove unstable finish before use to maximise penetration.
- Feather edges of damaged zones; consolidate fibres first, then proceed with fillers.
- Follow with Leather Light Filler or Heavy Filler, then Leather Primer, colourant and top coat.
Surface Repair
Professional, water-based micro-filler for superficial cracks, light creasing and minor surface defects on leather. Levels micro-fractures, stabilises the finish and prepares the area for recolouring — with a clean, matte surface ready for dye or top coat.
What It Does
Surface Repair penetrates and levels micro-cracks in the finish layer to restore a uniform surface profile. The refined rheology allows controlled application in very thin coats, minimal texture build-up, and predictable sanding to a feather-edge for an invisible blend.
Scope: designed for superficial defects only. Not for deep cuts, tears, open seams or structural damage — use Heavy Filler / Light Filler or mechanical repair methods for those cases.
Where It Works
Typical Areas
- Seat bolsters and armrests (light cracking)
- Steering wheels (micro-checking)
- Furniture contact zones (minor craze lines)
- Bags & small leather goods (edge micro-defects)
Leather Types
- Pigmented/finished leather
- Corrected-grain leather
- Semi-aniline (spot tests required)
Not intended for suede or nubuck.
How It’s Applied (Overview)
- Prep: Clean and degrease (Leather Ultimate Cleaner, then Alcohol Cleaner). Dry fully.
- Keying: Lightly abrade the area (≈800–1000 grit) to open micro-cracks; dust off.
- Apply thinly: Using a flexible spatula/card, pull very thin layers across the defect.
- Dry: Air-dry or gentle warm air. Do not overheat.
- Sand: Smooth with fine paper to a feather-edge. Repeat 2–3 micro-layers if needed.
- Recolour & protect: Apply Leather Colourant, then seal with Leather Top Coat (optionally with X-Guard Additive).
Technical Specifications
| Parameter | Value |
|---|---|
| Type | Water-based micro-filler for surface cracks |
| Use | Levelling superficial cracks/creases before recolouring |
| Application | Flexible spatula/card; thin multi-layers |
| Drying | Air/low heat; sandable between coats |
| Finish | Matte, paint-ready surface |
| Compatible systems | LeTech Leather Colourant; Leather Top Coat; X-Guard Additive (with top coat) |
| Available volumes | 100 ml / 200 ml |
Tips & Related Products
- Work in micro-layers to keep texture natural and avoid ridges.
- Feather the edges carefully; avoid over-sanding through the surrounding finish.
- For larger or stressed areas use Heavy Filler (structural) or Light Filler (minor scratches).
Why LeTech
Built for professional refinishing, LeTech Surface Repair brings control and repeatability to micro-defect correction. It integrates seamlessly with LeTech colourants and top coats, delivering a stable, paint-ready surface with minimal build.
Leather Alcohol Cleaner
Professional alcohol-based cleaner for targeted removal of stubborn contamination on leather, vinyl and PU. Quickly breaks down oils, dye transfer and residues, flashes off without sticky film and leaves the surface clean for subsequent repair or finishing steps.
What It Does
Leather Alcohol Cleaner provides controlled solvent action to lift greasy soils, hand/body oils, dye transfer from textiles and light ink marks*. It leaves minimal residue, helping achieve a uniform, receptive surface for Leather Binder, Fillers, Primer and Colourant.
Use for spot cleaning and finish preparation where a water-only degreaser is insufficient. Always test on a hidden area to check sensitivity and colourfastness.
*Effect on permanent inks varies; complete removal is not guaranteed.
Professional Applications
- Automotive: steering wheels, bolsters, armrests and door panels before refinishing.
- Furniture: high-touch zones with glossy build-up or dye transfer.
- Leather goods: handles/straps and local prep before colour repair.
Compatible Leather Types
Finished/pigmented leather and many coated PU/artificial leather surfaces. Not recommended for suede or nubuck. On aniline/semi-aniline, use with extreme care and test first.
Technical Specifications
| Parameter | Value |
|---|---|
| Type | Alcohol-based leather cleaner — exact composition requires verification |
| Action | Breaks down oils, dye transfer, light inks; low-residue finish |
| Application tools | Lint-free cloth, sponge or swab; small controlled amounts |
| Evaporation | Fast; proceed once dry-to-touch |
| Follow-up | Proceed with Degreaser/Prep/Binder or coating workflow as required |
| Available volumes | 200 ml / 6.76 fl oz · 500 ml / 16.91 fl oz · 1 L / 33.81 fl oz · 5 L / 169.07 fl oz |
Use with ventilation; keep away from ignition sources. Exact solvent grade and percentages — requires verification.
Tips & Related Products
- Work in small sections; do not flood the surface. Replace cloths as they soil.
- For heavy grease, pre-clean with Leather Liquid Degreaser, then refine locally with Alcohol Cleaner.
- For coating removal/degloss, use Leather Prep after degreasing as needed.
Leather Solvent Cleaner
High-strength solvent cleaner for professional preparation of leather, vinyl and PU. Removes stubborn contamination (oils, silicones, waxes, polishes), softens residual failing coatings and creates a uniformly keyed surface for reliable adhesion of repair and colour systems.
What It Does
Leather Solvent Cleaner quickly breaks down persistent films and embedded residues that water-based products cannot remove. Used with lint-free cloths or fine fibre pads, it evens gloss, feathers edges of unstable coating and prepares the substrate for Binder, Fillers, Primer, Colourant and Top Coat.
Recommended when Liquid Degreaser or Alcohol Cleaner are insufficient — for glossy build-up, silicone contamination and areas with micro-lifting of the top coat.
Professional Applications
- Automotive: steering wheels, bolsters and panels prior to recolouring.
- Furniture: armrests and high-touch zones with stubborn residues or failing finish.
- Leather goods: straps, edges and heavy-use areas before restoration.
Compatible Leather Types
Finished/pigmented leather and many coated PU/artificial leather surfaces. On aniline/semi-aniline use with extreme care. Not suitable for suede or nubuck. Always test on a hidden area.
Technical Specifications
| Parameter | Value |
|---|---|
| Type | Solvent-based leather preparation cleaner — exact composition requires verification |
| Function | Remove oils/silicones/waxes; degloss; soften failing films; improve adhesion |
| Application tools | Lint-free cloth; fine fibre/abrasive pad (light grade) where needed |
| Workflow | Wipe from seam to seam; feather edges; keep cloths/pads clean |
| Evaporation | Rapid; proceed once dry-to-touch |
| Available volumes | 200 ml / 6.76 fl oz · 500 ml / 16.91 fl oz · 1 L / 33.81 fl oz · 5 L / 169.07 fl oz |
| Safety | Use with ventilation; flammable; avoid ignition sources — see TDS/SDS |
Tips & Related Products
- Start with Leather Liquid Degreaser for general oils; use Solvent Cleaner where residues persist.
- For coating removal/keying, follow with Leather Prep to unify surface if required.
- Proceed with Leather Binder (if fibres are weak), then Light/Heavy Filler, Primer, Colourant, Top Coat.
Test first: aggressive action may affect sensitive or freshly coated areas.
Showing 13/20
EXPLORE OUR BESTSELLERS
