What It Does

Leather Top Coat Matt forms a transparent, flexible protective film that preserves the natural, low-gloss look of leather and PU. The finish controls unwanted shine on high-contact areas and protects recoloured surfaces from wear, moisture and dye transfer.

Built for professional restoration and OEM-style finishing where a **refined matte appearance** and durable protection are required.

Professional Applications

• Automotive: steering wheels, bolsters, seat panels and matte-trim zones.
• Furniture: seating and armrests where low gloss and cleanability matter.
• Leather goods: bags, wallets and accessories with a premium matte look.

Compatible Leather Types

Finished/pigmented leather and many PU/artificial leather surfaces. Always test on a hidden area first. Not suitable for suede or nubuck.

Technical Specifications

Spray settings, drying/curing times and Cross-Linker percentages — refer to TDS/SDS.

Tips & Related Products

• Prepare thoroughly (Degreaser → Prep → repairs) and build even colour before clear-coating.
• Apply **multiple light coats** to keep texture fine and sheen consistent seam-to-seam.
• For extreme-wear zones (e.g., steering wheels), combine with Cross-Linker for maximum endurance — verify ratio.
• To tune hand-feel, use a compatible Slip Additive — requires verification.

What It Does

Leather Top Coat Gloss forms a transparent, flexible protective film that enhances colour depth and sheen while shielding leather from daily wear. The finish provides a slick, easy-to-clean surface and helps prevent dye transfer and premature gloss loss on high-contact areas.

Designed for professional restoration and OEM-style finishing where a **deep, glossy appearance** and durable protection are required.

Professional Applications

• Automotive: seat panels, trim and steering-wheel areas (final protective layer).
• Furniture: high-touch seating and armrests needing a premium gloss look.
• Leather goods: bags, wallets, accessories for added sheen and durability.

Compatible Leather Types

Finished/pigmented leather and many PU/artificial leather surfaces. Always test on a hidden area first. Not suitable for suede or nubuck.

Technical Specifications

Spray settings, drying/curing times and Cross-Linker percentages — refer to TDS/SDS.

Tips & Related Products

• Ensure proper prep and even colour build before clear-coating (Degreaser → Prep → Primer → Colourant).
• Apply multiple light coats to avoid texture build-up and runs; allow adequate flash.
• For extreme-wear zones (e.g., steering wheels), use with Cross-Linker for maximum endurance — verify ratio.
• Match sheen across panels by finishing entire sections seam-to-seam.

What It Does

Leather Aniline Dye Pro is a next-generation dye system created to rejuvenate and restore natural leather. Unlike surface pigments, it penetrates deep into the fibre structure, enriching the leather from within and enhancing its natural character without masking its unique grain.

This professional-grade formulation is ideal for colour restoration, tone adjustment, production finishing, and customisation. Whether reviving faded leather interiors or finishing premium hides during manufacturing, Aniline Dye Pro delivers a rich, even colour while maintaining the soft, luxurious feel of the material.

Professional Applications

• Restoration: Revive faded leather interiors, furniture, and accessories while preserving their natural look and feel.
• Manufacturing: Achieve consistent colour tone and depth during leather production without altering texture.
• Customisation: Create bespoke shades or deepen existing colours for unique, premium finishes.
• Repair & refinishing: Seamlessly blend repaired areas with the surrounding surface.

Can be applied by hand (sponge or cloth) or with spray systems (airbrush or spray gun) for even professional-grade coverage.

Compatible Leather Types

Leather Aniline Dye Pro is formulated for use on:

• Aniline leather
• Semi-aniline leather
• Pull-up leather
• Vegetable-tanned leather
• Pigmented leather (for recolouring base tone)
• Corrected-grain leather

Not recommended for suede or nubuck. See Suede & Nubuck solutions in the LeTech range.

Technical Specifications

Tips & Related Products

• Combine with Leather Top Coat for enhanced surface durability and UV resistance.
• Add X-Guard Additive to your finish for maximum abrasion resistance and colour stability.
• Seal and protect the dyed surface with Leather Protection Cream for long-term performance.

Why LeTech

LeTech is a UK-based brand trusted by professionals in automotive, furniture, fashion, and aviation industries. Our Leather Aniline Dye Pro is engineered to deliver deep, even penetration and a natural finish, while remaining fully compatible with modern water-based finishing systems and LeTech protective technologies.

Pair it with other LeTech solutions for a complete, professional-grade leather restoration and finishing system.

What It Does

Leather Top Coat High Gloss delivers a luminous shine and robust protective barrier over dyed leather. It enhances abrasion resistance, blocks color transfer, and adds aesthetic brilliance without masking natural grain or soft touch.

This high-performance top coat is ideal for finishing restored interiors, custom leather goods, furniture, and high-end projects where shine and durability must coexist.

Professional Applications

• Auto interiors: Apply over dyed/leather surfaces to add gloss and protection.
• Furniture & upholstery: Gives a premium aesthetic finish for decorative leather items.
• Custom leather goods: Ideal for bags, jackets, and accessories requiring shine and abrasion protection.

Can be used standalone or enhanced by adding X-Guard Additive to boost protective performance. Also compatible with LeTech creams and finishing tools.

Compatible Leather Types

Suitable for use on:

• Aniline leather
• Semi-aniline leather
• Pigmented leather
• Corrected-grain/finished leather

For suede or nubuck finish, refer to Suede & Nubuck protector line.

Technical Specifications

Tips & Related Products

• For enhanced durability, mix X-Guard Additive into this Top Coat at 10-15 %.
• After curing, apply Leather Protection Cream to maintain softness under the glossy protection.
• Use in conjunction with Leather Aniline Dye Pro when performing restoration projects for a seamless final finish.

Why LeTech

LeTech Top Coats are engineered with modern water-based polymers and integrate seamlessly with the LeTech ecosystem (X-Guard, dyes, care creams). High Gloss protects, beautifies and strengthens your leather surfaces for years of use without sacrificing tactile quality.

For full finishing performance, combine with LeTech dyes, additives and care products.

What It Does

Open-pore leathers like suede and nubuck lose natural oils faster and are sensitive to cleaners and water. This formula replenishes lipids and humidity balance, softens the nap, and stabilises performance in daily wear, helping the leather keep its tactile luxury.

How It’s Applied (Overview)

1. Prep: dry-brush the surface; clean with Suede & Nubuck Cleaner. Dry fully; brush again to lift the nap.
2. Shake well: homogenise the Softener before use.
3. Apply evenly: spray/apply in a thin, uniform layer, avoiding drips.
4. Dry & finish: allow to air-dry; brush once more to refine the nap.

For complex materials, consult LeTech specialists for technique and leather identification.

Technical Specifications

What It Does

Foam works where liquids struggle: it carries contamination away from open fibers, reduces friction, and prevents deep wetting. The result is efficient cleaning that preserves colour, texture, and the characteristic nap of suede and nubuck.

Aftercare

Once dry, gently brush to lift the nap and refine the look. For long-term defence against water and stains, finish with LeTech Suede & Nubuck Protector WB.

For product selection and leather identification, consult LeTech specialists.

What It Does

Leather Lotion X-Guard Protected restores softness, natural sheen, and tactile comfort to leather surfaces while forming an invisible wax-protection layer enhanced with X-Guard polymer technology. The formulation prevents drying and cracking, repels moisture and dirt, and adds long-term UV resistance.

Leaves a dry, non-greasy finish with a light natural leather scent — ideal for automotive interiors, furniture, fashion leather and accessories.

Professional Applications

• Automotive: seats, steering wheels, dashboards, trim panels.
• Furniture: sofas, chairs, armrests and office seating.
• Leather goods: bags, jackets, footwear and accessories.

Compatible Leather Types

Safe for finished/pigmented leather, semi-aniline, pull-up, and many synthetic (PU) surfaces. Always test on a hidden area first.

Not suitable for suede or nubuck.

Technical Specifications

Tips & Related Products

• Apply after cleaning with Leather Ultimate Cleaner or Leather Soft Cleaner.
• Use regularly (every 3–6 months) to maintain elasticity and protection.
• For additional surface strength, combine with Leather Protection Cream or X-Guard Additive.

What It Does

Leather Re-Colouring Balm renews colour on worn or sun-faded areas and masks light surface scratches. The balm absorbs into the leather, supports softness and elasticity, and forms a durable, comfortable finish that resists everyday use.

Hydrophobic and soil-repellent components help protect against moisture and contamination while keeping the leather feel natural.

Where It Works

• Furniture leather
• Leather footwear & apparel
• Bags and leather accessories
• Craft & vegetable-tanned projects

Not for suede or nubuck — use dedicated Suede & Nubuck products.

Leather Types

• Aniline & semi-aniline
• Waxed & Pull-Up
• Two-tone “antique” finishes
• Vegetable-tanned leather

For best results, leather should be absorbent. Perform a small test spot.

How It’s Applied (Overview)

1. Clean: remove dust and dirt (Foam Leather Cleaner / Leather Ultimate Cleaner). Degrease heavy areas if needed (Leather Degreaser). Dry fully.
2. Apply: shake well. Use an applicator sponge; work the balm in circular motions with light pressure.
3. Level: allow the first coat to dry 5–10 minutes; inspect and re-apply if required.
4. Cure: let the piece dry for 6–12 hours for full set.
5. Polish: buff with a clean terry towel for an even tone and pleasant sheen.

Technical Specifications

Tips & Related Products

• Pre-clean with Foam Leather Cleaner or Leather Ultimate Cleaner; degrease collars/handles with Leather Degreaser if needed.
• After curing, maintain with Leather Care Kit Advanced for long-term appearance.
• Always test on a hidden area to confirm absorption and shade.

Why LeTech

Developed by a professional UK brand, Leather Re-Colouring Balm restores depth and uniformity to absorbent leather while preserving its character. A fast, dependable solution for furniture, apparel, footwear and leather goods.

What It Does

Leather MATT X2 creates a dense, durable top film that locks in a stable matte level (“anti-shine”) and protects leather from everyday wear. Built to meet and often exceed industry standards, it helps interiors keep a fresh, non-glossy appearance under real-world use.

Designed for professional finishing and restoration workflows where **consistent deep mattness** and **pleasant dry touch** are critical.

Professional Applications

• Automotive interiors: steering wheels, bolsters, seat panels and high-touch trim.
• Furniture & contract: seating in high-traffic hospitality and office environments.
• Leather goods: bags, wallets, cases requiring ultra-low gloss and cleanability.

Compatible Leather Types

For finished/pigmented leather and many PU/artificial leather surfaces within waterborne PU systems. Always test on a hidden area first.

Not recommended for suede or nubuck.

Technical Specifications

Tips & Related Products

• Prepare properly (clean/degloss) to ensure uniform mattness and adhesion.
• Apply multiple thin coats rather than one heavy coat to avoid texture build-up.
• For steering wheels and high-wear zones, combine with Cross-Linker and Slip Additive as per pro guidance for maximum endurance and refined touch.

Exact spray settings, temperatures and additive ratios — requires verification in TDS/SDS.